Material: PVC Applicable scenarios: Swimming and wading Water storage capacity: 140 liters Age: 2 years old and above Inflatable product maintenance: How to find the leak: Inflate it a little, put your hand close to the surface, or put your hand close to the surface if you have sensitive skin, and feel it. Where there is wind is the leak. Look for it little by little, be patient, and you will find it! Pinhole repair method: First, let the air out of the product almost completely, leaving a little inside, drop two or three drops of glue on the hole to block the hole, wait for the glue to dry, slowly press it flat, then press hard for 2-3 minutes and release it, and then inflate it after 2-3 hours. Repair method for larger holes: First, let the air out of the product almost completely, if the crack is suede, wet the suede first, use a blunt object to pick off the suede around the hole, or apply some glue around the hole, scrape the suede with a toothpick and it will fall off, then smooth the crack, cover the hole with glue first, wait for the glue to dry, press it flat, slowly press, and repair it with glue again, then cut a patch larger than the hole, and then use the patch to fill a layer, press for a few minutes, wait for the glue to dry, press it with a heavy object for a few hours, and then inflate it for use.