TSPZEM‑031 Digital Multi-Function LCD Display Voltmeter Ammeter Current Meter Tester Detector for DC

€ 33,95
+ € 7,49 Verzending

TSPZEM‑031 Digital Multi-Function LCD Display Voltmeter Ammeter Current Meter Tester Detector for DC

  • Merk: Unbranded
Verkocht door:

TSPZEM‑031 Digital Multi-Function LCD Display Voltmeter Ammeter Current Meter Tester Detector for DC

  • Merk: Unbranded

€ 33,95

Bespaar € 25,05 (42%)

Adviesprijs

€ 59,00
Op voorraad
+ € 7,49 Verzending
Verkocht door:

€ 33,95

Bespaar € 25,05 (42%)

Adviesprijs

€ 59,00
Op voorraad
+ € 7,49 Verzending

We accepteren de volgende betalingsmethoden

Beschrijving

1,Measuring function of electrical parameters (voltage, current, power, electric quantity). 2,Voltage alarm function (over voltage alarm threshold, backlight and power flicker prompt). 3,Power button reset function. It is designed to adapt to a poor light situation. 4,Power off data saving function, prevents from data losing when the power's off. 5,Full display function of large‑screen LCD (display voltage, current, power and power at the same time). Condition: Material: ABS Working Voltage: 6.5-100VDC Rated Power: 20A or 2000W Measurement Accuracy: Level 1.0 Display and Button Display Interface: The large LCD screen displays the voltage, current, power and power parameters simultaneously. Display Format: 1. Power: Test range 0-2kW The display format within 1kW is 0.0-999.9W The display format above 1kW is 1000-2000W. 2. Electricity: Test range 0-9999kWh The display format within 10kWh is 0-9999Wh The display format above 10kWh is 10-9999kWh Display format 6.50-99.99V 4. Current: Test range 0-20A The display format is 0.00-20.00 Button: 1. Control of the backlight The backlight can be turned on or off by short pressing the button, and the poor light state is automatically saved when the power is turned off. 2. Reset the battery Step 1: Press and hold the button until the ''CLr'' character is displayed in the power display area, and then release the button Step 2: At this time, the battery flashes to indicate that the battery is currently reset. If you press the button again for a short time, the power data is cleared and reseted and flashing Step 3: If there is no pressing operation within 5 seconds, it means that the power data is not reseted and exits the reset state. Step 1: Press and hold the button until the ''SET'' character is displayed in the power display area, and then release the button Step 3: After setting, press and hold the button until the screen displays ''PASS'' character to indicate that the setting is successful and automatically exits the setting state. 1 x DC Current Voltage Meter 1 x Instruction Manual Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Fruugo-ID: 434122164-911211536
  • EAN: 7846361048410

Levering & retouren

Verzonden binnen2 dagen

  • STANDARD: € 7,49 - Levering tussen ma 24 november 2025–ma 01 december 2025

Verzending vanaf China.

We doen ons best om ervoor te zorgen dat de producten die u bestelt volledig en volgens uw specificaties bij u worden afgeleverd. Mocht u echter een onvolledige bestelling ontvangen of andere artikelen dan degene die u heeft besteld, of als er een andere reden is waarom u niet tevreden bent met de bestelling, dan kunt u de bestelling retourneren, of welk product dan ook die bij de bestelling was inbegrepen, en ontvangt u een volledige terugbetaling voor de artikelen. Bekijk het volledige retourbeleid

Productconformiteitsdetails

Raadpleeg de onderstaande nalevingsinformatie die specifiek is voor dit product.

De volgende informatie wordt verstrekt door de onafhankelijke externe detailhandelaar die dit product verkoopt.

Fabrikant:
Hieronder treft u de contactgegevens van de fabrikant van het betreffende product dat op Fruugo wordt verkocht.

  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei City, Anhui Province, Shushan District, Anhui Province, No. 15, South Seventh Street, South Cooperative South Road, Chemical Machinery Community, Building 1, Unit 2, 603
  • Hefei
  • CN
  • 523011
  • nacufalacan81@hotmail.com
  • 13243801962

Verantwoordelijke persoon in de EU:
De volgende informatie bevat de contactgegevens van de verantwoordelijke persoon in de EU. De verantwoordelijke persoon is de aangewezen marktdeelnemer in de EU, die verantwoordelijk is voor de nalevingsvereisten met betrekking tot het product dat in de Europese Unie verkocht wordt.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901