Putting sprayer with container and 3 nozzles. Perfect for all your renovation and plastering work: The air pressure required for spraying comes from the compressed air supply. This sprayer is ideal for large work areas. A large, robust plastic funnel provides sufficient capacity to easily and smoothly spread materials such as plaster, plastic compounds, wood chip wallpapers, reinforcing plaster, quartz sand plaster up to 6 mm, dry quartz up to 8 mm, gypsum, interior and exterior plaster. The plastic container has a practical handle and a capacity of 6 liters and is equipped with a crescent-shaped opening (groove). This allows the device to also work in a slightly inclined position, allowing you to achieve neat and clean plastering results on walls and ceilings. The pneumatic putty sprayer with container should be used with a pressure of 4-8 bar. We recommend using a compressor with an air volume of at least 200 l/min, the required air volume is between 227 and 396 l/min. The plaster gun has a 13.2 mm (") compressed air connection. An air shut-off valve allows the air pressure to be adjusted. A solid, ergonomically shaped handle with a long trigger allows you to control the sprayer easily and comfortably. The versatile plaster gun is equipped with 3 interchangeable nozzles: 4.6 mm (3/16"), 6.3 mm (1/4") and 8 mm (5/16"). The plaster gun can be easily disassembled and cleaned....