Features:*100% brand new and high quality*Extract PLCC / IC on circuit board.Metal and shielded plastic avoids static charge damage IC components*Perfect for repair kits, such as TV / DVD / PC technicians or IC workers*Small hook for easy extraction and installation.*Simple to use, ergonomic, static-safe*With spring-assistance, simply align the pull pins to the chip, and squeeze to safely remove any chip in the 20-Pin to 80-pin ranges*Extractor:1.The PLCC can be easily removed from the substrate without damaging any IC conductors. ICC, PGA, PCLL, DIP package IC can be pulled out from SOCKET or PCB2.Use the handshake method to pull up the IC steadily in the vertical direction (not forced to pull up), so that the IC can be obtained to obtain the complete PIN3.For densely arranged IC, they can be directly pulled out without moving to other IC4.IC with different sizes within 5.5cm of the touch surface can be pulled out in a short time, which is easy and labor-saving. When pulling out PLCC chip, If you use a slotted screwdriver, it is not easy to use because there are other components around it. The extraction clip is difficult to remove. If it is not properly operated, it will cause damage to the socket or chip, and even cause the chip to be broken . We can prepare the chip for you, which can be directly used on the board to facilitate the extraction of PLCC. The packaged chip is a good tool for drawing up various chips and integrated blocks. It is used for motherboard, single chip microcomputer and programmer. This is the PLCC chip pick-up folder, which is more suitable for easy extraction of PLCC chip. It can be used to dial PLCC size: 20 to 84 feet. For specific use, insert the two legs of the pull-out clip from the two notches of the chip socket, then hold the clip and tighten the clip with a little force to easily pull out the chip. For PLCC package The chip, due to its special package form, should be operated with a dedicated chip pick-up clip. Use a ROM extractor