Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

€ 139,00
+ € 7,49 Verzending

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Merk: Unbranded
Verkocht door:

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Merk: Unbranded

€ 139,00

Bespaar € 130,00 (48%)

Adviesprijs

€ 269,00
Op voorraad
+ € 7,49 Verzending
Verkocht door:

€ 139,00

Bespaar € 130,00 (48%)

Adviesprijs

€ 269,00
Op voorraad
+ € 7,49 Verzending

We accepteren de volgende betalingsmethoden

Beschrijving

Condition: 100% Brand New <br>Item Type: Cylinder <br>Material: Aluminum Alloy <br>Color: As Pictures Shown <br>Optional Type: ACK63-90R, ACK63-90L <br> <br>Inner Diameter: Approx. 63mm / 2.5in <br>Piston Rod Outer Diameter: Approx. 20mm / 0.8in <br>Action Type: Double Action <br>Working Medium: Air (filtered by a Filter Screen Above 40μm) <br>Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) <br>Guaranteed Pressure Resistance: 1.5MPa (215psi) <br>Working Temperature (℃): -20-80 <br>Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s <br>Travel Tolerance Range: 1.0 <br>Rotation Angle Tolerance Range: Approx. ±1.5° <br>Buffer Type: None <br>Take over Caliber: PT1/8 <br>Installation and Use <br>1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. <br>2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. <br>3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. <br>4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. <br>5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod.<br>1、This is a double?acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. <br>2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. <br>3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. <br>4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. <br>5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.1 x Cylinder Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Fruugo-ID: 428219790-899763782
  • EAN: 6471506039599

Productveiligheidsinformatie

Raadpleeg de onderstaande productveiligheidsinformatie die specifiek is voor dit product

De volgende informatie wordt verstrekt door de onafhankelijke externe detailhandelaar die dit product verkoopt.

Productveiligheidslabels

CE Mark
Veiligheidswaarschuwingen: Not suitable for children under 36 months
Ingrediënten: Others

Levering & retouren

Wordt binnen 24 uur verzonden

  • STANDARD: € 7,49 - Levering tussen do 06 november 2025–vr 14 november 2025

Verzending vanaf China.

We doen ons best om ervoor te zorgen dat de producten die u bestelt volledig en volgens uw specificaties bij u worden afgeleverd. Mocht u echter een onvolledige bestelling ontvangen of andere artikelen dan degene die u heeft besteld, of als er een andere reden is waarom u niet tevreden bent met de bestelling, dan kunt u de bestelling retourneren, of welk product dan ook die bij de bestelling was inbegrepen, en ontvangt u een volledige terugbetaling voor de artikelen. Bekijk het volledige retourbeleid

Productconformiteitsdetails

Raadpleeg de onderstaande nalevingsinformatie die specifiek is voor dit product.

De volgende informatie wordt verstrekt door de onafhankelijke externe detailhandelaar die dit product verkoopt.

Fabrikant:
Hieronder treft u de contactgegevens van de fabrikant van het betreffende product dat op Fruugo wordt verkocht.

  • Luminary Lane
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

Verantwoordelijke persoon in de EU:
De volgende informatie bevat de contactgegevens van de verantwoordelijke persoon in de EU. De verantwoordelijke persoon is de aangewezen marktdeelnemer in de EU, die verantwoordelijk is voor de nalevingsvereisten met betrekking tot het product dat in de Europese Unie verkocht wordt.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901