Features High Efficiency: Improve printing speed and success rate with good fluidity and strength to withstand accidental drops. Easy to Clean: Minimal odor during 3D printing, easy post-print cleaning with airgun and spray to avoid sticking to the pan. For 3D Printing: UV resin with volume shrinkage for glossy and high resolution, ideal for 3D printing. Good Compatibility: Suitable for DLP LCD 3D printers, supports 8K, especially for small and half length models. Wide Application: 1000ml capacity for desktop models or industrial parts, practical and convenient for various applications. Features: 1、HIGH EFFICIENCY: The resin has good fluidity, can effectively improve the printing speed and success rate, and the strength is enough to withstand accidental drop. 2、EASY TO CLEAN: The resin has very little smell during 3D printing, after printing, only use an airgun and spray to clean it, so as to avoid sticking to the pan after printing. 3、FOR 3D PRINTING: This UV resin has volume shrinkage during curing, which brings glossy and high resolution to the printed model, is a good tool for 3D printing. 4、GOOD COMPATIBILITY: The rigid resin is suitable for DLP LCD 3D printers, which has good compatibility, and supports 8K, especially for small and half length models. 5、WIDE APPLICATION: The 3D printing rigid resin has a wide range of applications, with a capacity of 1000ml, used in desktop models or industrial parts, convenient and practical. Specification: Item Type: 3D Printing Resin Capacity: 1000ml Applicable Light Source Wavelength: 365-405nm Underlayer Exposure Time: 20-30S Bottom Layers: 6 layers Regular Exposure Time: 1.5-3S Density: 1.10-1.12g/cm3 Viscosity: 260-350mPa·s (at 25℃) Bending Strength: 47-50Mpa Tensile Strength: 48-54Mpa Hot Deformation Temperature: 85℃ Glass Transition Temperature: 100℃ Shore Hardness: 82D Fracture Elongation: 8%-12% Note: 1. The ambient temperature is 20-30 ℃. Do not print in the window or other environment exposed to ultraviolet light and try to isolate children and pregnant women. 2. Shake the resin for one to two minutes before use to prevent the components from settling. 3. It is recommended to wear nitrile gloves and protective mask when using, and keep indoor ventilation. Those who are allergic to acrylic acid should be cautious. 4. The residual liquid on the of the printed resin parts should be cleaned, and the cleaning process should not exceed 1 minut Package List 1 x Resin