BMW Diagnostic Tool: INPA K+CAN K+DCAN with FTDI FT232RL Chip & Switch USB Interface, OBD2 Scanner New arrival for BMW INPA K+CAN with FT232RL chip and switch, compatible with BMW vehicles equipped with 8-pin connectors and K-LINE protocol. USB OBD2 interface for BMW - INPA/Ediabas - K+DCAN enables full diagnostic functionality for BMW models from 1998 to 2013 (all functions equivalent to OMNITEC interface). Built-in K and D-CAN support. INPA K+CAN for BMW Features: 1. Read and clear error codes 2. Perform adaptations 3. Driver programming 4. Apply coding And other diagnostic functions INPA K+CAN for BMW Supports the Following Protocols: 1. High-speed D-CAN and PT-CAN (500 kbit/s) 2. Low-speed K-CAN (100 kbit/s) 3. Standard BMW OBD protocol Supported Vehicle Models: - E60, E61 from 03/2007 - E83 from 09/2006 - E81, E87 from 03/2007 - E90, E91, E92, E93 from 03/2007 - E70 (new model X5) - R56 (new model MINI) PT-CAN and K-CAN fully switchable CAN bus speeds allow diagnostics without requiring connection to a vehicle. Compatible with Older BMW Models Using OBD Interface: - From 1995 to 1998 (K-line not required) - From 1998 to 03/2013 (all models) Package Includes: 1 x K+CAN for BMW INPA Cable with Switch 1 x CD with Drivers