Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

€ 54,00
+ € 16,49 Verzending

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Merk: Unbranded

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Merk: Unbranded
Adviesprijs: € 179,00
Prijs: € 54,00
Je bespaart: € 125,00 (69%)
Verkocht door:
€ 54,00
+ € 16,49 Verzending

Op voorraad

We accepteren de volgende betalingsmethoden

Beschrijving

1Welding power can be powered by lithium battery or 12V car battery. 2The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters. 3The soldering pen and the input wire are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement. 4The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage. 5The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multiwire soft wire to increase the overcurrent capacity. 6Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion. 7The controller is mainly for welding 0.1mm to 0.15mm nickelplated steel strip, and the power input adds a 25V10000uF highfrequency lowresistance capacitor for energy compensation to increase stability.Item Type: Mini Spot WelderProduct Description:1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering PenPlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Fruugo-ID: 341577521-748850994
  • EAN: 653582880708

Productveiligheidsinformatie

Raadpleeg de onderstaande productveiligheidsinformatie die specifiek is voor dit product

De volgende informatie wordt verstrekt door de onafhankelijke externe detailhandelaar die dit product verkoopt.

Productveiligheidslabels

CE Mark
Veiligheidswaarschuwingen: Not suitable for children under 36 months, Adult supervision recommended

Levering & retouren

Verzonden binnen3 dagen

  • STANDARD: € 16,49 - Levering tussen di 07 oktober 2025–di 14 oktober 2025

Verzending vanaf China.

We doen ons best om ervoor te zorgen dat de producten die u bestelt volledig en volgens uw specificaties bij u worden afgeleverd. Mocht u echter een onvolledige bestelling ontvangen of andere artikelen dan degene die u heeft besteld, of als er een andere reden is waarom u niet tevreden bent met de bestelling, dan kunt u de bestelling retourneren, of welk product dan ook die bij de bestelling was inbegrepen, en ontvangt u een volledige terugbetaling voor de artikelen. Bekijk het volledige retourbeleid

Productconformiteitsdetails

Raadpleeg de onderstaande nalevingsinformatie die specifiek is voor dit product.

De volgende informatie wordt verstrekt door de onafhankelijke externe detailhandelaar die dit product verkoopt.

Fabrikant:
Hieronder treft u de contactgegevens van de fabrikant van het betreffende product dat op Fruugo wordt verkocht.

  • Chengdu Qingbin Tai Trading Co., Ltd
  • Chengdu Qingbin Tai Trading Co., Ltd
  • No. 1309, 13th Floor, Unit 1, Building 2, No. 68, Zhiquan Section, East Street, Jinjiang District, Chengdu City, Sichuan Province
  • Chengdu
  • China
  • 610065
  • chenghduyubin5542@outlook.com
  • 86 134 21832945

Verantwoordelijke persoon in de EU:
De volgende informatie bevat de contactgegevens van de verantwoordelijke persoon in de EU. De verantwoordelijke persoon is de aangewezen marktdeelnemer in de EU, die verantwoordelijk is voor de nalevingsvereisten met betrekking tot het product dat in de Europese Unie verkocht wordt.

  • REP Europe GmbH
  • REP Europe GmbH
  • Prinzenallee 7
  • Düsseldorf
  • Germany
  • 40549
  • info@rep-europe.de
  • 49 155 60128437