Kit For Orthodontic Teeth Bonding

1. Mainly used for bonding various orthodontic accessories. 2. Easy to use, less waste, independent operation and other advantages. 3. It has high clinical bonding strength, high efficiency and convenience of use. 4. Gorgeous adhesive resin for next generation enamel, complete accessory. Specification: Item Type: Orthodontic Dental Glue Type: small set Material: plastic Lifespan: 18 months Storage conditions: Store below 25 (do not freeze) Suitable for: all types of orthodontic attachment adhesion Main indicator of technical parameters: Curing time not more than 3000, adhesive strength on shear MPa17,2 Use: 1. Tooth preparation: cleaning the tooth enamel surface, removing dirt from the tooth surface, thoroughly rinsing the teeth with water, isolating the teeth and drying the tooth surface with an oil- and moisture-free air rifle. 2. Acid-damaged tooth surface: apply acid erosion agent to the tooth surface, after 50-60 seconds rinse thoroughly with water, dry with a dryer, the tooth surface after acid erosion becomes chalky. If there is no chalky appearance, the time of acid digestion is extended. 3. Primer: Using a bristle brush, apply a thin layer of liquid to the tooth etching surface, and with a second bristle brush (wet enough) lubricate the surface of the locks with a thin layer of liquid. 4. Gluing: Apply a small amount of paste using an agitator to the adhesive surface of the grooves covered with a liquid agent so that it forms a thin layer. Immediately after applying the paste, glue the lock and the surface of the tooth. Adjust the position of the bracket within 20 seconds and lightly press for 5-10 seconds to prevent the bracket from moving. Remove excess liquid and paste after 40-60 seconds. After 5 minutes of curing, you can proceed to orthodontic surgery. List of packages: 1 x paste 3,5g 1 x 2,5 ml digestion agent 1 x Liquid agent 8ml 7 x Brush Head 1 x needles 1 x Mixing Pen