Item Type: Optical Media Converter Material: Aluminum Alloy Purpose: Network Communication Basic Parameters: Access Method: 10/100Mbps Standard: IEEE802.3 10Base-T Ethernet.IEEE802.3u 100Base-TX/FX Fast Ethernet.IEEE802.3x Flow control., IEEE802.1a VLAN.IEEE802.10 QoS.IEEE802.1d Spanning Tree Wavelength: 850nm/1310nm/1550nm Transmission Distance: Multi Mode: 2km; Single Mode: 20-120km; Category 5 Twisted Pair: 100m Port: One RJ45 Port: Connect STP/UTP5 twisted pair cable One Fiber Port: Multi mode: SC/ST (50, 62.5/125μm) Single Mode: SC/FC (9/125μm) Conversion Method: Media conversion, store and forward, direct Address Table: 1K Buffer Space: 448Kbit Flow Control: Full Duplex State: Flow Control; Half Duplex State: Back Pressure Mode Error Rate: <19-9 MTBF: 50,000 Hours LED Indicators: Optical port speed, electrical port speed, optical port Link/Act, electrical port Link/Act, electrical port full duplex, power supply Power Consumption: <2W Working Temperature: -10-55°C Working Humidity: 5%-90% Storage Temperature: -40-70℃ Storage Humidity: 5%-90% Non Condensing 1、Optical Fiber Transceiver: Support pure transceiver mode, connect two PHYs, reduce the transmission delay to nanosecond level. 2、Transmission Mode: Supports full duplex and half duplex transmission modes, and can auto negotiate to ensure stable transmission. 3、Easy Installation: Supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation. 4、Low Power Consumption: With low power consumption chip, low heat generation, support 2U?14 slot rack, 2U?16 slot rack, suitable for network communication. 5、LED Indicator: Supports optical port rate, electrical port rate, optical port Link/Act, electrical port Link/Act, electrical port full duplex, power supply. 1 x Transceiver A 1 x Transceiver B 2 x Power Adapter 1 x Manual