Shower Curtain Set with Hanging Rings NoPunching Bath Curtain Bathroom Accessory(150x180cm ) Item Type: Shower Curtain Material: Polyester Pongee Scope of Application: Bathroom Weight: Approx. 310-405g / 10.9-14.3oz Installation: Put the rings on the shower curtain bar and then put the shower curtain in 1. Rod type shower curtain (1) The shower curtain rod is divided into two ways: expansion rod and nut fixing. If you need to hang a straight shower curtain rod at home, and there are wall on both sides as support points, you can choose an expansion rod. The shower curtain rod is very convenient to install and move. You can put a bath towel on it, and it should be fixed firmly. (2) If it is an arc-shaped shower curtain rod, it is best to choose a way that both ends are fixed to the wall with nuts. Use stainless steel pipe material. The pipe wall should be slightly thicker and will not be deformed by placing towels. It will take a long time e . 2. Analysis of shower curtain installation height 1. When installing the shower curtain, first install the shower curtain rod and the shower curtain; when installing the bathroom water barrier, determine its position according to the installation height of the shower curtain rod and the position of the shower curtain bottom, and the water barrier must be installed on the shower curtain Otherwise, the water from the shower will flow outside the shower curtain. 2. The installation height of the shower curtain rod is determined by the height of the shower curtain. When purchasing the shower curtain, the size of the shower curtain must be determined according to the size of the shower area; 3. When installing the shower curtain rod, the height of the bottom of the shower curtain from the ground is about 1-3 cm, which can prevent water from splashing to other places in the bathroom and prevent the shower curtain from being dragged on the floor.