Item Type: Gear Shift KnobMaterial: Artificial Leather + Aluminum AlloySize: Approx. 2.17x2.95in/55x75mm(W x H)Threaded Adapters Inner Diameter: Approx. 8mm/0.315in, 10mm/0.394in, 12mm/0.472in(Caliber M8, M10, M12)INSTALLATION STEPS:1. Unscrew the original gear shifter knob to get it off from your gear stick.2. Wrap a few turns with electric tape on your gear stick thread to keep tight if necessary.3. Get off the aluminum alloy bottom cover of this shifter head and put it on the shifting rod.4. Install the matching threaded adapter of black rubber sleeve on the shifting stick.5. Screw the stick shift handle on the shifting rod with small screws by the hex wrench.6. Rotating aluminum bottom cover into the the car shift knob and tighten all up.Make sure your original stick shifter removable.1. Not suitable for the original car shifter with its own irremovable lock/function button.2. For manual transmissions: Not suitable for the reverse gear of original car shifter needed to lift up.3. For automatic transmissions: Cannot be installed for those cars with the reverse gear next to the 1st gear.4. Wrap a few turns with electric tape on your gear stick thread to keep tight if necessary.1Easy to install, with 3 sizes of threaded adapters, 8mm/0. 315in, 10mm/0. 394in, 12mm/0. 472in, suitable for manual or automatic transmission cars. 2With 5 speed gear shift, and you can increase your driving speed and provide comfortable control. 3Due to the leather material, it feels smooth, grips better, and improves driving comfort. 4Wide range of applications, and it is very suitable for most manual cars, SUVs or trucks. 5Classic and stylish, it can improve your vehicle interior and add some style to your riding. 1 x Gear&nbspShift&nbspKnob 3 x Adapter 4 x Fixed Screw 1 x Wrench