Features 1、Fully compatible with the "ISO 11898" standard. 2、High speed (up to 1M baud). 3、Low electromagnetic radiation (EME). 4、Differential receiver with wide input range for immunity to electromagnetic interference (EMI). 5、Nodes that are not powered up will not interfere with the bus. Specification The TJA1050 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. The TJA1050 provides different transmit performance for the bus and provides different receive performance for the CAN controller. The TJA1050 is the successor to the PCA82C250 high-speed CAN transceiver. The TJA1050 has made significant improvements in the following areas: CANH and CANL ideally match to minimize electromagnetic emissions. Performance is improved when there is no power-on node. Features: 1. Fully compatible with the "ISO 11898" standard. 2. High speed (up to 1M baud). 3. Low electromagnetic radiation (EME). 4. Differential receiver with wide input range for immunity to electromagnetic interference (EMI). 5. Nodes that are not powered up will not interfere with the bus. 6. Send data (TXD) control timeout function. 7. Silent mode when sending disable. 8. Automatically protect bus pins during transients. 9. Input stage compatible with 3.3V devices. 10. Thermal Protection. 11. Short circuit protection for power and ground. 12. Can connect at least 110 nodes. Specification: Package Size: about 22*11.5*3cm/8.66*4.53*1.18inch < Mnemonic Specification Condition Minimum Maximum Unit VCC Power Supply 4.75 5.25 V VCANH DC voltage of pin CANH 0< VCC <5.25V; no time limit -27 +40 V VCANL DC voltage of pin CANL 0< VCC <5.25V; no time limit -27 +40 V Vi(dif)(bus) Different bus input voltage control 1.5 3 V tPD(TXD-RXD) TXD to RXD propagation delay time VS = 0V; see Figure 7 - 250 ns Tamb Ambient Temperature -40 +125 °C Package List: 1 * Module Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.