The MT6816 is a third-generation magnetic angle encoder chip. It uses anisotropic magnetoresistive () technology and proprietary signal processing techniques to achieve absolute angle measurement from 0 to 360°. The chip consists of a pair of Wheatstone bridges and a signal processing ASIC. As the magnetic field parallel to the chip rotates, the chip outputs a corresponding encoded angle signal with a signal latency of less than 2µs. The angle data calculated internally can also be read via the high-speed SPI interface. Compared to traditional Hall effect sensors, angle sensors operate in the saturation region, reducing magnetic field requirements and making installation easier. The MT6816 is widely applicable to various consumer and industrial applications, including motor position feedback control and rotation control. ABZ communication: JP1 is the ABZ communication port, with the default AB = 1024 and Z = 4. If programming is not required during ABZ communication, short the HVPP pin to GND. SPI communication: JP2 is the four-wire SPI communication port, which allows programming of the chip. PWM output: JP3 is the PWM output port, with the default PWM frequency being 971. UVW communication: The W/Z, V/B, and pins are multiplexed and cannot be used simultaneously. Model: -135 Chip model: MT6816 JP1: ABZ output (AB: 1024, Z: 4) JP2: SPI JP3: PWM: 971.1Hz Color:Black Material:PCB Package Contents: 1 * Magnetic encoder 1 * Magnet 1 * pin Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.