CP2112 highly integrated USB to SMBus bridge controller integrates a USB 2.0 full-speed function controller, USB transceiver, oscillator, and 8 GPIO pins. Using a simple GUI-based configuration tool, all customization and configuration options can be selected, eliminating the need to develop complex firmware for standard HID class devices. Supplied with software and drivers, the CP2112 enables fast USB connectivity with minimal development effort. 1. USB bus powered: 4.0 to 5.25V 2. Self-powered: 3.0 to 3.6V, I/O voltage: 1.8V to 3.6V 3. Operating temperature: -40°C to 85°C 4. On-chip reset circuit and on-chip voltage regulator with 3.45V output 5. Complies with USB specification 2.0, full speed (12 Mbps) 6. Supports USB suspend state via SUSPEND pin 7. Integrated 194-byte one-time programmable ROM for storing customizable product information 8. 512-byte SMBus data buffer, configurable clock speed and device address (7-bit value) 9. HID to SMBus library for rapid application development, supports Windows and Linux 10. 8 GPIOs configurable as input/output, open-drain or push-pull for external devices; configurable clock output from 48MHz to 94kHz; supports LED toggle via read/write operations on SMBus devices 11. Application areas: portable controllers, USB dongles, data logging Material: Plastic and metal Color: As shown Package Contents: 1 x Module, 2 x Row Pins Note: Light reflection and display differences may cause slight color variation between the image and actual item. Measurement may vary by +/- 1-3 cm.