LCD Screen with Digitizer Full AssemblyBefore Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with glass splinters.Tips 2: Simulated testingScreen replacement is a very fragile product. We strongly suggest testing before installation. Please perform simulated testing, which means opening the mobile phone, connecting the motherboard, LCD or screen, o cable, and the new replacement, then powering on to complete the test. If the test is successful, proceed with installation. If there is no display, please immediately. Do not force installation. We will not be responsible once the screen is installed.Tips 3: Do not over-bend the cablePlease make sure the LCD cable is not over-bent. Bending beyond 90 degrees may cause a black display.About the product1. LCD display and touch screen digitizer assembly replacement part2. Replace your broken or non-functional unit with a new one3. Restore your device to a like-new appearance4. Full compatibility and proper fit5. Each item is tested and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible after the screen is installed