Specification: _x005f_x000D_ Certification: CE _x005f_x000D_ Origin: Mainland China _x005f_x000D_ Rated voltage: 12V (fan motor)+5V (lamp bead) _x005f_x000D_ Current: (not exceeding) 10A _x005f_x000D_ Power: (not exceeding) 60W _x005f_x000D_ Number of interfaces: 10 PWM interfaces (4PIN), 10 ARGB interfaces (3PIN) _x005f_x000D_ Control mode: PWM intelligent temperature control, main board 5V ARGB Shenguang synchronization _x005f_x000D_ Power interface: SATA 15PIN _x005f_x000D_ Controller size: About 95.5x54.5x14.3mm/3.75x2.14x0.56inch _x005f_x000D_ Total weight: About 0.136kg _x005f_x000D_ Before purchasing, it is necessary to know: _x005f_x000D_ A hub is not a controller, it is only used when the motherboard interface is insufficient. The hub cannot control the fan speed to make the fan light up, which requires motherboard support or an external controller to be used _x005f_x000D_ The fan interface supported by the 12V and 5V versions is different, and 5V cannot be connected to 12V or 12V to 5V. It is not a converter, please do not misunderstand _x005f_x000D_ The red interface on the hub needs to be connected to a temperature controlled fan. Other interfaces can be connected at will, but when connected to a three pin fan, the speed of the other interfaces will not synchronize and will run at full speed. This depends on whether the three pin speed control is supported. The hub will not allow a three pin fan that does not support temperature control to achieve temperature control function _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x005f_x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 x Splitter Hub _x005f_x000D_ 1 x Remote control _x005f_x000D_ 1 x Main board synchronization line _x005f_x000D_ 1 x PWM temperature control signal line 1. ARGB+PWM+Remote Control 3-in-1: Up to 10 sets of programmable 5V/3Pin ARGB+small 4P/FAN fan interfaces, equipped with motherboard connection cable and PWM temperature control signal cable. The fan speed and lighting effect can be synchronized in real-time to the motherboard for free control, supporting motherboard signal synchronization, and can simultaneously control 10 fans to meet your needs for connecting more devices. 2. Remote Control: The hub is equipped with a remote control that can control light off and on, mode locking, fan color change speed, light effect mode switching, light brightness adjustment, motherboard synchronization and remote control mode switching, and automatic color change mode 3. 5V 3-pin ARGB: Capable of synchronizing motherboard light control, supporting for compatible with ASUS, for MSI, for Gigabyte, and for Huaqing motherboards. By controlling the motherboard, the lighting can be synchronized with other ARGB products, and effects such as flowing lights, splicing, and displaying text patterns can be achieved through programming. Only compatible with 3pin 5V addressable RGB connectors or controllers, do not connect to 12V RGB components, otherwise it may burn out. 4. PWM Intelligent Temperature Control Noise Reduction: The controller can be connected to the main board CPU FAN interface to access temperature control signals. When the CPU temperature increases, the fan automatically increases its speed and quickly cools down; When the CPU temperature decreases, the fan automatically lowers its speed, saving electricity and reducing noise. SATA 15PIN power supply can simultaneously power fans and 5V 3-pin ARGB products. The motherboard has no power supply burden and can maintain stable output even when fully loaded.