2PCS XT-XINTE M2 to USB 3.1 Enclosure Adapter M.2 USB3.1 Gen2 Type-A 1000MB/s Case for NVME M.2 2230 2242 SSD External Box Note: Please use well-known brands of SSD , such as for Samsung, Toshiba, ect. It is not recommended to use unknown brands of SSDs, because many unknown brand of SSDs are not compatible with our product. Brand: XT-XINTE Color: black gray Product size: 80x25x9mm Weight: 49g Product parameters: Product name: NVME to USB3.1 type-A 2242 in-line hard disk box Support SSD: M.2 NVME protocol solid state drive Only supports PCIe x2 and PCIe x4 NVME protocol M.2 SSD, does not support PCIe x2 and PCIe x4 AHCI protocol M.2 NGFF SSD, does not support B+M key SATA protocol M.2 NGFF SSD) Color: black/iron gray Support specifications: 2230, 2242 (other lengths are not supported) Chip: JMS583 TYPEC 3.1 chip, support mainstream nvme pcie m2 hard drive on the market External interface: USB3.1 Type-A straight plug interface is downward compatible with USB3.0 USB2.0 interface (supports USB2.0 and 3.0 interfaces, of course you run 2.0 when you connect 2.0, and run 3.0 when you connect 3.0) Reading speed: 1000MB/s (This data is for reference only) The actual reading speed is mainly related to the SSD and the device. The test results of the same device on different SSDs are different. Note : don't support old version NVME SSD, pls take it into account before placing an order. packing list: 1. Hard disk box x2 2. Heat diipating silicone patch x2 (where is the hot paste, there is no fixed requirement) 3. Screw x2 (movable screw, 2230/2242 can be fixed) 4. Screwdriver x2