Programmable Digital Servo - 17.3gr / 0.10 sec

Each servo is fully programmable to define a range of important and useful features that will help you optimize your radio installation.

A total of 140 degrees available, plus 25% programmable by transmitter, means that as much as 175 degrees of throw can be obtained. So these servos not only guarantee as much control throw as you will ever need, but are also perfect for retract and scale hatch installations.

Speed is adjustable from 1% to 100%, and 1% is VERY slow indeed

Best of all is the prices. No expensive programming box is needed to access all these useful features - it is a simple cable you attach to your PC.

Download Atlas servo specifications from here (PDF) 

Each servo is fully programmable to define a range of important and useful features that will help you optimize your radio installation.

A total of 140 degrees available, plus 25% programmable by transmitter, means that as much as 175 degrees of throw can be obtained. So these servos not only guarantee as much control throw as you will ever need, but are also perfect for retract and scale hatch installations.

Speed is adjustable from 1% to 100%, and 1% is VERY slow indeed

Best of all is the prices. No expensive programming box is needed to access all these useful features - it is a simple cable you attach to your PC.

HP-DS12ACP

HP-DS12HCP

HP-DS12GCP

Servo type

Fully programmable digital mini servo

Dimensions mm

29.5 x 12 x 26

Weight gram

16.9

17.3

17.3

Speed (sec/60 deg @ 4.8/6.0V)

0.16/0.13

0.13/0.10

0.08/0.06

Dynamic torque (kg/cm @ 4.8/6.0V)

2.6/3.2

1.7/2.0

1.3/1.8

Holding torque (kg/cm @ 4.8/6.0V)

5.2/6.4

3.4/4.0

2.6/3.2

Gear Train primary material

CarbonPoly

Bearing

Plain

Programmable

Yes, with free PC software connected via USB adapter (HP-HP-AT-PRGUSB)

Rotation in degrees

Adjustable 30 to 140 degrees total, 90 degree default (45 each way)

Adjustable travel speed

Yes, 1% to 100% of Rated Speed (100% default)

Maximum input voltage

Unloaded input voltage should never exceed 7.8V, loaded input voltage max 6.25V

Download Atlas servo specifications from here (PDF)